专注于工业润滑油销售
品牌润滑油授权经理商,正品保证
网站幸运飞艇网站 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯 | 联系我们
专注于工业润滑领域一站式采购 电话:0755-28027380 传真:0755-28027382 手机:13926530627 13537722320
工业润滑油专区

联系我们
深圳市鑫盈科贸易幸运飞艇网站
地址:深圳宝安区龙华新区民治工业区
电话:0755-28027380
传真:0755-28027382
联系人:13926530627 蒋先生 13537722320 赵小姐
手机:13926530627 13537722320
网址:http://www.xinyuebook.com
邮箱:xykrhy@126.com

 

 
产品展示 >> RENOLIN CKC 150
RENOLIN CKC 150详细说明。ㄤ??15次)

RENOLIN CKC

High Performance CKC Gear Oils

High Performance CKC Gear Oils

Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

The special characteristics of RENOLIN CKC series lubricants are:

  • High pressure absorption and excellent wear protection
  • Good viscosity-temperature behaviour and excellent low-temperature characteristics
  • Good corrosion protection for steel and nonferrous metals
  • Good resistance to ageing
  • Good compatibility with sealing materials
  • Low foaming
  • Avoidance of frictional vibration by the use of surface-active additives
  • Good demulsification characteristics
  • Multipurpose applications

Application:

RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.

RENOLIN CKC 100 150 220 320 460 680
Lubricating oil type
acc. to ISO 6743-6 CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680
acc. to DIN 51 502 CLP 100 CLP 150 CLP 220 CLP 320 CLP 460 CLP 680
Characteristics Unit Test method
Colour 2 3 4 4.5 5 5 ASTM D 1500
Kinematic viscosity
at 40 °C mm?/s 94.4 145.6 214 331 468 690 ASTM D 445
at 100 °C mm?/s 11.1 14.5 18.5 24.6 30.8 36.8 ASTM D 445
Viscosity index 102 98 96 96 95 87 ASTM D 2270
Density at 15 °C kg/l 0.884 0.89 0.895 0.9 0.903 0.922 ASTM D 1298
Flash point, Cleveland open cup °C 220 225 230 230 240 245 ASTM D 92
Pour point °C – 27 - 24 - 21 - 15 – 12 – 12 ASTM D 97
Neutralization number mg KOH/g 0.33 0.33 0.33 0.33 0.33 0.33 ASTM D 974
Saponification number mg KOH/g 1.3 0.84 0.84 0.84 0.84 0.84 ASTM D 94
Sulphate ash % mass 0.1 0.1 0.1 0.1 0.1 0.1 ASTM D 874
Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
Demulsification min < 20 < 20 < 20 < 20 < 20 < 20 DIN 51 599
Foaming,
seq. I ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. II ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. III ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention pass B pass B pass B pass B pass B pass B ASTM D 665
Ageing behavior,
viscosity increase % 1 1 1 1 1 1 ASTM D 2893
precipitation number increase ml < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change % 7 7 7 7 7 7 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore - 3 - 3 - 3 - 3 - 3 - 3 DIN 53 521 together with DIN 53 505

上一产品: Mobil SHC Gear 680 OH,Mobil SHC Gear 680OH,Mobil SHC Gear680OH
下一产品: Mobilgear SHC MT 68 美孚SHC MT68
Copyright (C) 2009 深圳市鑫盈科贸易幸运飞艇网站官方网站 http://www.xinyuebook.com All Right Reserved
地址:深圳宝安区龙华新区民治工业区 电话:0755-28027380 传真:0755-28027382 邮编:xykrhy@126.com 粤ICP备16090050号
工业润滑油|壳牌润滑油|美孚润滑油|福斯润滑油|加德士润滑油|嘉实多润滑油